Nov 10, 2026

[MOS-AK] ESSERC W7 Workshop in Palma


Synopsys: The 23rd MOS-AK/ESSERC Compact Modeling Workshop in Palma de Mallorca brings together the international community advancing SPICE/Verilog-A modeling, OpenPDKs, and open-source IC design flows. Since 2002 ESSEDRC/ESSCIRC in Porto, MOS-AK has been the leading forum connecting technology developers, circuit designers, and FOSS CAD/EDA contributors, supporting knowledge exchange and strengthening the open semiconductor ecosystem. This year's program showcases cutting-edge developments: GaN MOS-HEMT compact models for emerging OpenPDKs, AI/ML-driven modeling workflows replacing manual tuning, cryogenic FD-SOI model libraries, fully open-source RFIC design case studies using IIC-OSIC-TOOLS, reliability insights for advanced CMOS and RF technologies, and a new OpenPDK MOSFET matching matrix IC enabling fast mismatch characterization. The workshop organizers are inviting engineers, researchers, and students who want a clear, practical view of modern device models and open simulation frameworks. It directly supports global OpenPDK adoption and aligns with European ODE4EC-AMS activities, promoting accessible, reproducible, and future-ready IC design methodologies.

9:30 - 11:00W7 Workshop Opening
T_1 ODE4EC-AMS OpenPDK: the Status and Roadmap
Wladek Grabinski
IHP OpenPDK (D)
T_2 Advances in Open-Source Verilog-A Compilation and Simulatio>
Arpad Buermen
Uni. Ljubljana (SL)

T_3 Compact Modeling of GaN MOS-HEMTs for Open PDKs
Ashkhen Yesayan
EPFL (CH)

T_4 From Manual Tuning to Agentic AI: Transforming Device Modeling with AI/ML
Roberto Tinti
Keysight (US)


11:00 - 11:30Coffee Break
T_5 Development of Cryogenic Model Libraries for FD-SOI Transistors
Phanish Chava
AdMOS (D)

T_6 Open-Source RFIC Design: Case Studies Using IIC-OSIC-TOOLS
Georg Zachl
JKU Linz (A)

T_7 Reliability topics for the miniaturization and qualification and OpenSilicon perspective
Fernando Guarin
IEEE EDS D1 (US)

P_1 [Poster] OpenPDK MOSFET Matching Matrix IC
Juan Brito
CEITEC (BR)
SSCSCode-a-Chip Award Ceremony
Akira Tsuchiya
SSCS TC-OSE

13:00-14:00End of the W7 Workshop and Lunch Break

The MOS-AK workshop was followed by ESSERC W2 Joint Workshop FAMES Pilot Line and SiNANO Institute reviwing the FDSOI Pilot Line Insights and Perspective. W2 was the first to present in-depth technical results obtained through the FAMES Pilot Line project on the development of FD-SOI at 10nm and 7nm nodes, combined with non-volatile memories (NVM) and 3D options, RF components and smart PMIC (Power Management Integrated Circuit), providing a pathway to deliver high-performance, low-power consumption solutions for future chips.

With the highlight talk: Next generations of FD-SOI technology for low-power and RF applications
by Thierry Poiroux (CEA-Leti, FR) and Valeriya Kilchytska (UCLouvain, BE)




IEEE EDS/SSCS/CAS MQ in Palma


IEEE EDS/SSCS/CAS Mini-Colloquium
FRIDAY 11 September
Sa Riera Building
C/ de Miquel dels Sants Oliver, 2
07122 Palma

IEEE EDS/SSCS/CAS MQ PROGRAM
9:00 - 09:05 Opening

9:05-9:15 Tribute to Prof. Michael S. Shur

9:05-9:15 Tribute to Prof. José Epifânio da Franca

​​​​9:15-10:05 Leveraging semiconductor technology for the benefit of society
Fernando Guarin (Director of IEEE Division I)

10:05-10:55 Power efficient WBG devices for the green transition
Mikael Ostling (KTH, SE)

10:55-11:25 Coffee Break

11:25-12:15 Holistic solutions to future computing - not only scaling
Francesca Iacopi (Purdue University, US)

12:15-13:05 Status of the Compact modeling and its Verilog-A standardization
Wladek Grabinski (MOS-AK, CH and IHP OpenPDK, DE)

13:05-14:25 Lunch​​

14:25-15:15 Graphene thin film technology for neural interfaces
José Antonio Garrido (ICN2, Barcelona, Spain)

15:15-16:05Energy-Efficient Analog IC Design: Exploring Solutions at De vice, Circuit and System Levels
Antonio López (Public University of Navarra, Spain)

Nov 9, 2026

[paper] Cryo mm-Wave Multifinger nMOSFETs

Adhi Cahyo Wijaya ,Jyh-Chyurn Guo  
Cryogenic mm-Wave Device Optimization and Modeling with Temperature and Layout Dependent Effects in Multifinger nMOSFETs and Si Substrate
Journal of the EDS, Vol. 14, 2026 935

Institute of Electronics, National Yang Ming Chiao Tung University, Hsinchu 300, Taiwan
Department of Electrical Engineering, National Yang Ming Chiao Tung University, Hsinchu 300, Taiwan

ABSTRACT: In this paper, cryogenic device optimization aimed at super-450GHz fT and fMAX and new equivalent circuit models with layout- and temperature-dependent effects (LDE and TDE) over 300K∼4K are presented. Open and short pad models incorporating TDE have been developed and verified by experimental data, showing extremely high Si substrate resistance (Rsi) at below 25K and the minimum Rsiat 77K followed by a turn around at above 77K. Interestingly, for active devices at on-state, carriers freezeout in the Si substrate at cryogenic temperature is suppressed, which motivates development of enhanced pad models for accurate deembedding and simulation of on-Si-chip devices and mm-wave circuits over 300K∼4K. For sub-40nm nMOSFETs with respectively optimized multi-finger (MF) layouts, the maximum fT and fMAX at 4K can reach up to 447GHz and 95 GHz.

FIG: (a) The full equivalent circuit model (b) physical representation for a full structure with intrinsic MOSFET model and enhanced pad model by adding Rsi0(g,d) and Csi0(g,d) for accurate simulation and deembedding at cryo-temp.

Acknowledgement: This work was supported in part by the National Science and Technology Council (NSTC) under Grant NSTC-114-2221-E-A49-206.

Oct 29, 2026

[paper] Logarithmic Power Detector

Patrick Fath and Harald Pretl
A 44-GHz Logarithmic Power Detector with 62 dB Dynamic Range and –56 dBm Sensitivity 
in 130-nm SiGe BiCMOS Using Open-Source EDA
IEEE Asia Pacific Conference on Circuits and Systems (APCCAS) 
Fukuoka, Japan, October 2026
 
Institute for Integrated Circuits and Quantum Computing, JKU Linz, Austria
 
Abstract: This paper presents a 44-GHz logarithmic RF power detector implemented in the open-source IHP SG13G2 130nm SiGe BiCMOS OpenPDK using exclusively open-source EDA tools. The proposed detector is based on a six-stage successive detection logarithmic video amplifier architecture with integrated square-law detectors, followed by a transimpedance amplifier and an output buffer. To achieve both low noise and high speed, two different limiting-amplifier topologies are employed within the successive detection logarithmic video amplifier, namely a low-noise differential common-emitter input stage and high-speed Cherry-Hooper stages. A tunable proportional-to-absolute-temperature constant-gm bias generator is used to reduce the temperature dependency of the amplifier gain, while duty-cycled operation is supported to lower the average power consumption. Post-layout simulations show a passband gain of 64 dB, a frequency range from 0.15 GHz to 44.7 GHz, a sensitivity of-56 dBm, and a dynamic range of 62 dB. In addition, RF stability is verified over the investigated frequency range, and the detector achieves an estimated video bandwidth of 114 MHz. The total power consumption is 95.7 mW in continuous operation and is reduced to 48.1 mW in duty-cycled operation. The active area is 0.43 mm^2, while the die size including pads is 1.4×1.2 mm^2. These results demonstrate that competitive wideband logarithmic RF power detectors extending into the mm-wave range can be realized using open-source design infrastructure.

Fig. (a) Transient response of the detector under duty-cycled operation, showing pon (dashed gray) and Vlog, out (solid blue). (b) Layout of the detector (1.4×1.2 mm^2) with the individual building blocks outlined 


[paper] Cryo 1T1R HfO2-Based RRAM

Emilio Pérez-Bosch Quesada, Alberto Mistroni, Ruolan Jia, Keerthi Dorai Swamy Reddy, Markus Fritscher, Felix Reichmann, Oliver Skibitzki, Juan Bautista Roldán, Helena Castán, Salvador Dueñas, Christian Wenger, Eduardo Pérez
Enabling Quantum-Compatible Nonvolatile Memory: Cryogenic Evaluation 
of 1T1R HfO2-Based RRAM From 300 to 1.5K
Advanced Electronic Materials 12, no. 19 (2026): e00798
DOI: 10.1002/aelm.202500798

ABSTRACT: To enable compact quantum computing systems, cryogenically compatible CMOS-based non-volatile memories are required. In this work, we investigate 1-transistor–1-resistor (1T1R) resistive random-access memory (RRAM) devices over an extended temperature range, including previously unexplored cryogenic regimes. To enhance storage density, we explore a multilevel-cell approach via multilevel programming. As temperature decreases, the low-resistance state (LRS) effective conductance increases, improving state separation but also leading to higher LRS currents and increased reset voltages required for reliable switching to the high-resistance state (HRS), resulting in incomplete filament rupture and a broader HRS distribution. Through independent characterization of the access nMOS transistor, we identify transistor temperature dependence as the dominant factor governing LRS evolution, while extraction of the intrinsic metal–insulator–metal (MIM) behavior reveals an opposite trend, with decreasing conductivity at lower temperatures. Based on these insights, we implement an optimized programming strategy for cryogenic operation by tuning the nMOS gate bias during set, reducing LRS currents, particularly in intermediate and high conductance states, while preserving state separation, narrowing the HRS distribution, and lowering reset voltages. Overall, this work establishes a robust and scalable approach for reliable 1T1R operation at cryogenic temperatures and provides a key step toward nonvolatile memory integration in quantum computing architectures.
FIG: a) Cryogenic setup used to characterize the RRAM devices under study, b) RRAM array containing a total of 32 1T1R devices individually addressable, and c) schematic description of the forming, set, and reset operations carried out during this work.

Acknowledgments: This work was financially supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Project 551916740.