Oct 8, 2026

Schematic to Silicon with Mini MOSbius

Zero To ASIC Course and Tiny Tapeout by Matt Venn
Schematic to Silicon with Mini MOSbius 
https://www.youtube.com/watch?v=NM5cLWYWqG0

MOSbius

Take Matt Venn TT course: 
https://www.zerotoasiccourse.com/
Buy a copy of Mini MOSbius, part of the TT IP library, here: 
https://store.tinytapeout.com/products/TTSKY25b-Development-Kit-p849160072
Check the configurator: 
https://github.com/mattvenn/mini-mosbius-configurator

Mini MOSbius is available on these chips
  • [OK] TTSKY25a - delivered July 2026 - available in the store
  • [OK] TTSKY25b - delivered August 2026 - available in the store
  • TTSKY26b - tapeout May 2026
  • TTSKY26c - tapeout September 2026
  • GF180 - will be taped out December 2026
and finally check out the original MOSBius: https://mosbius.org/ If you are interested to acquire MOSbius kits, review the express license and email Peter Kinget for kit availability before placing an order.


[poster] Active Cantilever with Dual Actuator

Bartosz Pruchnik1, Fabian Dietrich2, Richard Subianto2, Katerina Ivanova2, Athulya K. Muraleedharan Bindu2, Hans-Georg Pietscher2, Javad Basseri2, Muralikrishnan Brajesh Kaimal2, Władysław Kopczyński1, Wojciech Godlewski1, Dominik Badura1, Piotr Putek1, Krzysztof Kwoka1, Piotr Smagowski1, Andrew Yacoot3, Tomasz Piasecki1, Fangzhou Xia4, Ivo W. Rangelow2 
Active Cantilever with Dual Actuator
52nd International Micro and Nano Engineering Conference
Sep. 21-24, 2026 Interlaken (CH)
MEN2026 Poster S05A-T2-P-5

1. Wrocław University of Science and Technology,
2. nano analytik GmbH, 
3. National Physical Laboratory
4. University of Texas at Austin

Abstract: Atomic Force Microscopy (AFM) is often limited by the speed and bandwidth of three main components: the cantilever, the scanner, and the controller. Recent microelectromechanical systems (MEMS) have improved the performance of the cantilever and scanner by combining high-speed active cantilevers with low-latency scanners. In this work, we present a standardized active cantilever design. The system combines a large cantilever that acts as a Z-axis actuator with a smaller active cantilever sensor that provides a bandwidth greater than 400kHz. The smaller cantilever is integrated into the larger structure, creating a compact and highly responsive device. We introduce a new active cantilever architecture that uses two integrated electrothermal actuators. One actuator is used for cantilever operation, while the second provides vertical (Z-axis) movement for surface tracking. This design allows AFM measurements to be performed without the need for an external piezoelectric z-actuator.


Acknowledgements: This work was supported by the European Union's Horizon Europe research and innovation program under the Marie Sklodowska-Curie grant agreement No 101072775, and by the National Science Centre, Poland (grant No. 2021/41/B/ST7/03144).

Oct 6, 2026

[paper] Open Source EZ130 8T standard cell library

Oscar Castaneda, Lavinia Recchioni, Tobias Senti, Flurin Cahenzli, Marco Ferroni, Thorben Heekenjann, Robert Kenter, Stefan Odermatt, Daniel Richner, Gabriel Altendorfer, Davide Cannone, Miguel Correa, Ivan Herger, Lars Kroger, Nicolas Nanzer, Darja Nonaca, Christopher Reinwardt, Lukas Winklhofer, Enrico Zelioli, Yiheng Zhang, Yingxue Zhang, Domenic Keller, Seyed Hadi Mirfarshbafan, Zerun Jiang, Beat Muheim, Arianna Rubino, Jeremy Guichemerre, Frank K. Gurkaynak, and Christoph Studer
An Open-Source Standard-Cell Library for IHP 130 nm Developed by Students
arXiv:2609.29965v1 [cs.AR] 24 Sep 2026

1. Department of Information Technology and Electrical Engineering, ETH Zurich, Switzerland
* The open-source EZ130 8T standard-cell library is available at https://ez.ethz.ch

Abstract: Standard-cell libraries form the critical interface between transistor-level circuit design and automated digital design flows, yet their design and characterization are rarely covered in depth in digital VLSI courses. This paper presents VLSI 5, a graduate-level course at ETH Zurich in which students design, lay out, characterize, and integrate their own standard cells using IHP’s open-source 130 nm SG13G2 process design kit. In the first course offering, 19 students developed EZ130 8T, an open-source eight-track standard-cell library comprising 220 cells. We evaluate successive library versions using eight synthesis benchmarks, across which EZ130 8T achieves significant area reduction compared to the SG13G2 library at competitive timing. For a postlayout 8×8 matrix-vector multiplier, EZ130 8T reduces cell area by 35% and energy by 39% while maintaining virtually the same clock period. The library has already been adopted in other ETH Zurich VLSI courses, enabling the creation of chips entirely designed by students down to the transistor level.
FIG: a.) ETH Zurich course series on digital VLSI design. By teaching students to create a standard-cell library, the new VLSI 5 course closes the gap between transistor-level and HDL-level IC design;
b.) and c.) Layout of two example standard cells from the EZ130 8T library.

Aknowlegements: This work has received funding from the Swiss State Secretariat for Education, Research, and Innovation (SERI) under the SwissChips initiative. The authors thank Cadence for their support by providing licenses to design and characterize the EZ library. The authors also thank H. Pretl, T. Benz, and P. Sauter for their feedback on preliminary versions of the EZ library.

[paper] n-MOS pseudo-resistor nA current reference

Bruni, Italo, Mariane Petraglia, and Fabián Olivera
Area-efficient nanoampere current reference employing
a temperature-controlled n-MOS pseudo-resistor
AEU IJ EC (2026): 156642.
DOI: 10.1016/j.aeue.2026.156642

Abstract: This paper presents a CMOS current reference topology that avoids the use of large-area resistors by using a temperature-controlled pseudo-resistor. The proposed technique for achieving a reference current consists of applying proportional to absolute temperature (PTAT) and complementary to absolute temperature (CTAT) voltages to the drain and gate of an n-MOS EKV-based pseudo-resistor, respectively, thereby stabilizing its current against temperature variations. Two current reference design versions, namely D01 and D02, were implemented using a 180 nm technology. Extensive post-layout simulation results for design D01 show a typical reference current of 6.30 nA, an average temperature coefficient (TC) of 414 ppm/C (nominal 219 ppm/C) across a range from −40C to 120C, and a line regulation (LR) of 11.76 %/V. To improve LR, design D02 was developed, achieving a significantly optimized LR of 0.33 %/V while maintaining a typical current of 6.22 nA and an average TC of 401 ppm/C (nominal 191 ppm/C) over the same temperature range. The area-efficient technique enables compact silicon areas of 0.0018 mm2 and 0.0020 mm2 for D01 and D02, respectively.

FIG: Schematics of the CTAT voltage generator topologies: .a) 3T; b.) 6T
and its layout implementation of the current reference designs: c.) D01; d.) D02.

Acknowledgment: This work was supported in part by the Brazilian research funding agencies CNPq, FAPERJ, and Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) Finance Code 001; by grant 307092/2025-9, funded by CNPq/MCTI/FNDCT N∘18/2024; and by grant E-26/204.222/2025 (SEI-260003/020616/2025), founded by FAPERJ JCNE .

Oct 4, 2026

[webinar] Colombia in OpenSilicon Age

IEEE SSCS: Colombia in OpenSilicon Age

  • Date: Thursday, October 8, 2026
  • Time: 1:00 PM – 2:30 PM (Colombia, GMT-5)
  • Platform: Cisco Webex
  • Access: Free/Open access

This open online event is the first IEEE SSCS Colombia session. It shares a vision for creating a strong microelectronics ecosystem in Colombia by bringing universities and industry together and helping develop highly skilled engineers. The event will review the current state of microelectronics in Colombia, discuss the future of integrated circuit (IC) design, present recent semiconductor policy initiatives, and explain the goals of the IEEE SSCS Colombia chapter. Speakers from Colombia and abroad will share their experience in IC design, open-source silicon, semiconductor education, and industry development. The session aims to encourage collaboration between academia, industry, and government to support the growth of the semiconductor sector in Colombia.

Featured Panelists and Keynote Speakers

  • Made in Colombia: Review of Colombian Microelectronics
    Javier Ardila, Onsilicon, UIS and President, IEEE SSCS
  • ColombiaThe Global Map of CI Design: Tools, Foundry and Methodology
    Hugo Hernández, Teradar, Boston, MA
  • OpenSilicon Opportunities
    Fernando Guarín IEEE Division 1
  • Bill for the promotion of the electronics and semiconductor industry
    Lorena García Founder, Colombian Network of Electronics and Semiconductors