May 11, 2020

Conference Paper Reached 500 Reads

Wladek 
Wladek Grabinski, Daniel Tomaszewski, Farzan Jazaeri, Anurag Mangla, Jean-Michel Sallese, Maria-Anna Chalkiadaki, Antonios Bazigos, and Matthias Bucher
FOSS EKV 2.6 Parameter Extractor
22nd International MIXDES Conference, pp. 181-186 (2015)

Abstract: The design of advanced integrated circuits (IC) in particular for low power analog and radio-frequency (RF) application becomes more complex as the device level modeling confronting challenges in micro- and nano-meter CMOS processes. As present CMOS technologies continue geometry scaling the designers can benefit using dedicated SPICE MOSFET models and apply specific analog design methodologies. The EKV was developed especially to meet altogether the analog/RF design requirements. This paper describes a basic set of the DC parameter extraction steps for the EKV 2.6 model. The free open source software (FOSS) Profile2D tool was used to illustrate an accurate EKV 2.6 DC extraction strategy. 


[paper] BSIM-HV: High-Voltage MOSFET Model

H. Agarwal , Member, IEEE, C. Gupta , Graduate Student Member, IEEE, R. Goel , Graduate Student Member, IEEE, P. Kushwaha , Member, IEEE, Y.-K. Lin , Graduate Student Member, IEEE, M.-Y. Kao , Graduate Student Member, IEEE, J.-P. Duarte , Graduate Student Member, IEEE, H.-L. Chang , Member, IEEE, Y. S. Chauhan , Senior Member, IEEE, S. Salahuddin, Fellow, IEEE, and C. Hu, Life Fellow, IEEE
BSIM-HV: High-Voltage MOSFET Model Including Quasi-Saturation and Self-Heating Effect
IEEE TED, vol. 66, no. 10, pp. 4258-4263, Oct. 2019
doi: 10.1109/TED.2019.2933611

Abstract - A BSIM-based compact model for a high-voltage MOSFET is presented. The model uses the BSIM-BULK (formerly BSIM6) model at its core, which has been extended to include the overlap capacitance due to the drift region as well as quasi-saturation effect. The model is symmetric and continuous, is validated with the TCAD simulations and experimental 35- and 90V LDMOS and 40V VDMOS transistors, and shows excellent agreement.
FIG: Schematic of the LDMOS. Lightly doped n-region constitutes the drain. Majority of the applied drain voltage drops across this region, which protects the intrinsic transistor region from breakdown.
Manuscript received March 3, 2019; revised May 23, 2019 and July 24, 2019; accepted July 31, 2019. Date of publication August 26, 2019; date of current version September 20, 2019. This work was supported in part by the members of the Berkeley Center for Negative Capacitance Technology and the members of the Berkeley Device Modeling Center. The review of this article was arranged by Editor B. IƱiguez.

[paper] Compact Device Models for FinFET and Beyond

D. D. Lu, M. V. Dunga, A. M. Niknejad, C.Bing Hu, F.-X. Liang, W.-C. Hung, J. Lee, C.-H. Hsu
and M.-H. Chiang,
Compact device models for FinFET and beyond
ArXiv, vol. abs/2005.02580, 2020

Abstract - Compact device models play a significant role in connecting device technology and circuit design. BSIM-CMG and BSIM-IMG are industry standard compact models suited for the FinFET and UTBB technologies, respectively. Its surface potential based modeling framework and symmetry preserving properties make them suitable for both analog/RF and digital design. In the era of artificial intelligence / deep learning, compact models further enhanced our ability to explore RRAM and other NVM-based neuromorphic circuits. We have demonstrated simulation of RRAM neuromorphic circuits with Verilog-A based compact model at NCKU. Further abstraction with macromodels is performed to enable larger scale machine learning simulation.
Fig: Simulation of a novel floating - gate synaptic transistor. (a) Device structure with separate negative feedback gate (nfb) for programming and synaptic gate (sg) readout. (b) Equivalent circuit diagram for compact modeling 
Acknowledgements - The authors would like to express sincere gratitude to Chip Implementation Center (CIC), Hsinchu, Taiwan for providing SPICE simulation environment for RRAM simulations.

May 7, 2020

[PhD] Compact DC Modeling of Tunnel-FETs

Compact DC Modeling of Tunnel-FETs
November 2019
PhD Thesis of Fabian Horst 
Doctor Advisor: Profs. Benjamin Iniguez and Alexander Kloes

Abstract - In the last decade, the tunnel field-effect transistor (TFET) has gained a lot of interest and is handled as a possible successor of the conventional MOSFET technology. The current transport of a TFET is based on the band-to-band (B2B) tunneling mechanism and therefore, the subthreshold slope at room temperature can overcome the limit of 60 mV/dec. In order to describe and analyze the TFET behavior in circuit simulations, this dissertation introduces a compact DC model for double-gate TFETs. The modeling approach considers the B2B tunneling and the parasitic effect of trap-assisted tunneling (TAT) in the ON- and AMBIPOLAR-state of the TFET. It includes a 2D compact potential equation package to de-scribe the band diagram of the TFET. Based on the band diagram, the B2B tunneling and TAT current part are derived separately. In order to do so, firstly a compact expression for the tunneling length is found, which is then used together with a numerical robust Wentzel-Kramers-Brillouin (WKB) approach to calculate the tunneling probability. Afterwards, using Landauer’s tunneling equation, the tunneling generation rate is calculated and approximated to come to a closed-form expression for the current density. Further approximation of the current density by a mathematical function, compact expressions for the resulting B2B tun-neling and TAT current are achieved. The verification of the model is done with the help of TCAD Sentaurus simulation data for various simulation setups. Furthermore, the validity of the model is proven by measurements of fabricated complementary TFETs. In order to demonstrate the numerical stability and continuity as well as the flexibility, simulations of TFET-based logic circuits like a single-stage inverter or an SRAM cell are performed and analyzed. The combination of the DC model with an TFET AC model allows for a transient simulation of an 11-stage ring oscillator. 

Fig: 2D sketch of the n-type DG TFET device geometry, showing the channel thickness t ch , the channel length l ch , the gate oxide thickness tox and the length of the S/D region l sd . Source (S) and drain (D) region are highly p/n-doped with a doping concentration N s/d 

URL: http://hdl.handle.net/10803/668957

May 6, 2020

IEEE EDS DL Series by the EDS Delhi Chapter



IEEE.org
IEEE Electronc Devices Society
IEEE Electron Device Society (EDS) Delhi Chapter – India
&
Department of Electronic Science
University of Delhi South Campus, New Delhi, India
Delhi University - Colleges, Cut off 2020, Courses, Fees, Admissions
Jointly Organizes
EDS Distinguished Lecture
(Live Session under EDS Distinguished Lecturer Program - Virtual Lectures)
Online Live Webinar Lecture Schedule (via Google Meet)
April 30, 2020 at 10:30 am (past event)
High-k Dielectric and Interface Engineering for High Performance Si/Ge MOS and FinFETs
Kuei-Shu Chang-Liao
Department of Engineering and System Science
National Tsing Hua University, Hsinchu, Taiwan
May 01, 2020 at 10:30 am  (past event)
Two-dimensional Layered Materials for Nanoelectronics
http://ap.polyu.edu.hk/ychai/images/20140716_231304.jpgYang Chai
Associate Professor, Department of Applied Physics
The Hong Kong Polytechnic University
May 05, 2020 at 01:30 pm (past event)
Introducing two-dimensional layered dielectrics in solid-state micro-electronic devices
Mario LanzaMario Lanza
Institute of Functional Nano & Soft Materials, Soochow University, Collaborative Innovation Center of Suzhou Nano Science & Technology, China
May 06, 2020 at 06:30 pm (past event)
Field Effect Transistors: From MOSFET to Tunnel-FET
Joao Antonio Martino
Professor at University of Sao Paulo, Brazil
May 08,2020 at 06:30 pm IST
Junctionless Nanowire Transistors: Electrical Characteristics and Compact Modeling
Marcelo Antonio Pavanello Centro Universitario FEI, Department of Electrical Engineering Av. Humberto de Alencar Castelo Branco, Sao Bernardo do Campo,  Brazil
May 11, 2020 at 01:30 pm IST
From CMOS to Neuromorphic Computing - A peek into the future
EEE Staff Photo Prof M De SouzaMaria Merlyne De Souza
Department of Electronic and Electrical Engineering
The University of Sheffield, United Kingdom 
May 12, 2020 at 10:30 am IST
Phase change electro-optical devices for space applications
Mina Rais-Zadeh  portraitMina Rais-Zadeh
Group Supervisor, Advanced Optical and Electromechanical Microsystems Group, Micro Device Laboratory, NASA JPL, Pasadena, CA
May 15, 2020 at 08:30 pm IST
State-of-the-Art Silicon Very Large Scale Integrated Circuits: Industrial Face of Nanotechnology
https://ecse.rpi.edu/~shur/index_files/Shur.jpgMichael S. Shur 
Electrical, Computer and Systems Engineering and Physics, Applied Physics, and Astronomy
Rensselaer Polytechnic Institute 
May 16, 2020 at 02:00 pm IST
Transparent and Flexible Large Area Electronics
Arokia  Nathan portraitArokia Nathan 
Cambridge Touch Technologies, 
University of Cambridge, United Kingdom (UK)
May 20, 2020 at 02:30 pm IST
Trends and challenges in Nanoelectronics for the next decade
Elena  Gnani portraitElena Gnani 
Department of Electrical, Electronic and Information Engineering, University of Bologna, Italy 
May 22, 2020 at 07:30 pm IST
Accelerating commercialization of SiC power electronics
Victor VeliadisVictor Veliadis
Executive Director and CTO, Power America
Professor of Electrical and Computer Engineering, 
North Carolina State University
May 27, 2020 at 07:30 pm IST
Advanced III-N Devices for 5G and Beyond
Patrick Fay
Department of Electrical Engineering, 
University of Notre Dame
More talks will be added so if you wish to attend any of these then then kindly register on:


Coordinated by:
Dr. Manoj Saxena, SMIEEE, FIETE, MNASc (India)
EDS BoG Member (2018-2020) & EDS DL
Regional Editor for South Asia, IEEE EDS Newsletter
Associate Professor, Department of Electronics 
Deen Dayal Upadhyaya College, University of Delhi 
Dwarka Sector-3, New Delhi, India; Email: msaxena@ieee.org 
Professor Mridula Gupta, SMIEEE, FIETE
Chairperson-IEEE EDS Delhi Chapter
Head, Department of Electronic Science
University of Delhi South Campus
New Delhi 110021, India