[slides] (Ultra-) Wide-Bandgap Devices

(Ultra-) Wide-Bandgap Devices: Reshaping the Power Electronics Landscape

Presenter Dr. Yuhao Zhang, Assistant Professor,
Center for Power Electronics Systems, Virginia Tech

IEEE EDS SCV-SF Seminar 

Friday, June 12, 2020 at 12PM – 1PM PDT

Abstract: Power electronics is the application of solid-state electronics for the control and processing of electrical energy. It is used ubiquitously in consumer electronics, electric vehicles, data centers, renewable energy systems, and smart grid. The power semiconductor device, as the cornerstone technology in power electronics, is key to improving the efficiency, cost and form factor of power electronic systems.  Recently, the power electronics landscape has been significantly reshaped with the production and application of power devices based on wide-bandgap (WBG) semiconductors, such as gallium nitride (GaN) and silicon carbide (SiC). Besides advancing the performance of traditional power systems, WBG devices have also enabled many emerging applications that are beyond the realm of silicon (Si) as well as changed the manufacturing paradigm of power electronics. On the horizon is the power devices based on ultra-wide-bandgap (UWBG) materials, which promises superior performance over GaN and SiC and is at the relatively early stage of research development.  This talk will provide a comprehensive overview of major WBG and UWBG power device technologies, spanning materials, devices, reliability and applications. Some research projects in the PI’s group in collaboration with industry will also be introduced.

FIG: WBG Semiconductor: Superior Power Semiconductor Over Si

The seminar presentation is now available on our IEEE EDS SCV-SF webpage:
http://site.ieee.org/scv-eds/files/2020/06/SCV_SF_EDS_Yuhao_Zhang_excerpt.pdf

More information at the IEEE EDS Santa Clara Valley-San Francisco Chapter Home Page. Subscribe or Invite your friends to sign up for our mailing list and get to hear about exciting electron-device relevant talks. We, EDS SCV-SF, promise no spam and try to minimize email. You can (un)subscribe easily.

[paper] Future of Ultra-Low Power SOTB CMOS

Nobuyuki Sugii¹, Shiro Kamohara², Makoto Ikeda³

The Future of Ultra-Low Power SOTB CMOS Technology and Applications

NANO-CHIPS 2030. The Frontiers Collection. Springer, Cham

DOI: 10.1007/978-3-030-18338-7_6

1.Hitachi, Ltd.Tokyo, Japan
2.Renesas Electronics Corp.Tokyo, Japan
3.The University of Tokyo, Japan

Abstract: Ultra-low power technology has drawn much attention recently as the number of connecting (Internet-of-Things) devices rapidly increases. The silicon-on-thin-buried oxide (SOTB) technology is a CMOS device technology that uses fully depleted silicon-on-insulator (FDSOI) transistors with a thin buried oxide layer enabling enhanced back-bias controllability and that can be monolithically integrated with the conventional bulk CMOS circuits. It can significantly reduce both the operation and the standby powers by taking advantage of low-voltage operation and back-biasing, respectively. In this chapter, advantages of the SOTB technology in terms of ultra-low power, circuits design and chip implementation examples including ultra-low power micro-controllers operating with harvested power, reconfigurable logic circuits, analog circuits, are reviewed, and a future perspective is shown.

Fig.: Schematic cross section of SOTB transistors. Hybrid bulk transistors are shown. SOTB  transistors are used in low-voltage (< ~1.5 V) logic and analog circuits including SRAMs. Bulk  transistors are used in peripheral, ESD-protection, high-voltage analog and power circuits, on-chip,  flash memory, and reuse of legacy circuits

Acknowledgements: The part of the work, especially on developing the SOTB technology by the Low-power Electronics Association and Project (LEAP), is supported by the Ministry of Economy, Trade and Industry (METI) and the New Energy and Industrial Technology Development Organization (NEDO). Part of the chip fabrication by the universities is done under a support of VLSI Design and Education Center (VDEC) in collaboration with Renesas Electronics Corporation, Cadence Corporation, Synopsys Corporation and Mentor Graphics Corporation.

IEEE PS Webinar "G2V and V2G Technologies in Electric Vehicles"

IEEE Photonics Society Student Chapter of Mangalam College of Engineering is geared up with webinar series to provoke the little spark in you

• Date:16-06-2020
• Time:10:30 - 11:30 AM IST
• Pre registration link: https://bit.ly/3dTeDzP
• Topic: G2V and V2G Technologies in Electric Vehicles
• Speaker: Dr.Sreejith.S; Assistant Professor,
  Department of Electrical Engineering,
  National Institute of Technology, Silchar, Assam

We, IEEE Photonics Society Student Chapter, invite you all to join this webinar and take away some useful stuffs in this quarentine. Registration free!!! See you there. All registered participants are honoured with e-certificates

Webinar Link: https://bit.ly/2ZgJuBY
For further queries contact our coordinators:
Alsufiyan   : +91 7736598136
Nandhu : +91 9061383258

Stay Safe, Enjoy learning!! Stay updated with us for more exciting events!...

[paper] Organic Permeable Base Transistors

Darbandy, G., Dollinger, F., Formánek, P., Hübner, R., Resch, S., Roemer, C., Fischer, A., Leo, K., Kloes, A., Kleemann, H., 

Unraveling Structure and Device Operation of Organic Permeable Base Transistors

Adv. Electron. Mater. 2020, 2000230 

DOI 10.1002/aelm.202000230

Abstract: Organic permeable base transistors (OPBTs) are of great interest for flexible electronic circuits, as they offer very large on‐current density and a record‐high transition frequency. They rely on a vertical device architecture with current transport through native pinholes in a central base electrode. This study investigates the impact of pinhole density and pinhole diameter on the DC device performance in OPBTs based on experimental data and TCAD simulation results. A pinhole density of N Pin = 54 µm−2 and pinhole diameters around L Pin = 15 nm are found in the devices. Simulations show that a variation of pinhole diameter and density around these numbers has only a minor impact on the DC device characteristics. A variation of the pinhole diameter and density by up to 100% lead to a deviation of less than 4% in threshold voltage, on/off current ratio, and subthreshold slope. Hence, the fabrication of OPBTs with reliable device characteristics is possible regardless of statistical deviations in thin film formation.

Fig.: Device stack of an OPBT. The central base electrode is permeable to electrons. The device current flows between emitter and collector, while the base layer is passivated by an oxide layer.

The device current can be modulated by the base‐emitter voltage V_BE

Acknowledgements: G.D. and F.D. contributed equally to this work. This project was funded by the German Research Foundation (DFG) under the grants KL 1042/9‐2 and LE 747/52‐2 (SPP FFlexCom) and by the European Community’s Seventh Framework Programme under Grant Agreement No. FP7‐267995 (NUDEV). This work was supported in part by the German Research Foundation (DFG) within the Cluster of Excellence Center for Advancing Electronics Dresden (cfaed) and the DFG project HEFOS (Grant No. FI 2449/1‐1). Furthermore, the use of HZDR Ion Beam Center TEM facilities and the funding of TEM Talos by the German Federal Ministry of Education of Research (BMBF; grant No. 03SF0451) in the frame‐work of HEMCP are acknowledged. The authors thank Tobias Günther and Andreas Wendel of IAPP for sample preparation.

[paper] GaN/AlGaN 2DEGs grown on bulk GaN

Luisa Krückeberg¹,  Steffen Wirth²,  Victor V. Solovyev³, Andreas Großer¹, Igor V. Kukushkin^3,4,  Thomas Mikolajick^1,5, and  Stefan Schmult⁵

Quantum and transport lifetimes in optically induced GaN/AlGaN 2DEGs

grown on bulk GaN

Journal of Vacuum Science and Technology B 38, 042203 (2020)

DOI: 10.1116/1.5145198

¹NaMLab GmbH, Dresden (D)
²Max-Planck-Institute for Chemical Physics of Solids, Dresden (D)
³Institute of Solid State Physics RAS, Moscow (RU)
⁴National Research University Higher School of Economics, Moscow (RU)
⁵Institute of Semiconductors and Microsystems, TU Dresden, Dresden (D)

ABSTRACT A two-dimensional electron gas (2DEG) is absent in ultrapure GaN/Al0.06Ga0.94N heterostructures grown by molecular beam epitaxy on bulk GaN at 300 K and in the dark. However, such a 2DEG can be generated by UV illumination and persists at low temperature after blanking the light. Under steady UV illumination as well as under persistence conditions, pronounced quantum transport with Shubnikov–de Haas oscillations commencing below 2 T is observed. The low temperature 2DEG mobility amounts to only ∼20 000 cm2/V s, which is much lower than predicted for the dominant scattering mechanisms in GaN/AlGaN heterostructures grown on GaN with low threading dislocation density. A rather small ratio of the transport and quantum lifetimes τt/τq of ∼10 points at elastic scattering events limiting both the transport and quantum lifetimes.

FIG. (a) Photograph of a Hall bar device and (b) its two-terminal resistance R2pt at stabilized temperatures between 120 and 135K. The estimated UV power during illumination is in the low nanowatts range, which does not result in a saturation of R2pt at these specific temperatures. The recombination time, i.e., the time until disappearance of the 2DEG, increases significantly at 120K. At 100 K, no increase in R2pt is observed after switching off the illumination.

ACKNOWLEDGMENTS The NaMLab gGmbH part was financially supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project No. 405782347, the German Federal Ministry of Education and Research—BMBF (Project “ZweiGaN,” No. 16ES0145K), and the German Federal Ministry of Economics and Technology—BMWi (Project No. 03ET1398B). V.V.S. and I.V.K. acknowledge the support from the Russian Science Foundation (Grant No. 19-42-04119). The TU Dresden part of the work was partially funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—Project No. 348524434.