[paper] FDSOI Threshold Voltage Model

Hung-Chi Han1, (Student, IEEE), Zhixing Zhao2, Steffen Lehmann2,

Edoardo Charbon1, (Fellow, IEEE), and Christian Enz1 (Life Fellow, IEEE)

Novel Approach to FDSOI Threshold Voltage Model Validated at Cryogenic Temperatures

in IEEE Access, DOI: 10.1109/ACCESS.2023.3283298

1 Ecole Polytechnique Fédérale de Lausanne (EPFL), 2000 Neuchâtel, Switzerland
2 GlobalFoundries, 01109 Dresden, Germany

Abstract: The paper presents a novel approach to to the modeling of the back-gate dependence of the threshold voltage of Fully Depleted Silicon-On-Insulator (FDSOI) MOSFETs down to cryogenic temperatures by using slope factors with a gate coupling effect. The FDSOI technology is well-known for its capability to modulate the threshold voltage efficiently by the back-gate voltage. The proposed model analytically demonstrates the threshold voltage as a function of the back-gate voltage without the pre-defined threshold condition, and it requires only a calibration point, i.e., a threshold voltage with the corresponding back-gate voltage, front- and back-gate slope factors, and work functions of front and back gates. The model has been validated over a wide range of the back-gate voltages at room temperature and down to 3 K. It is suitable for optimizing low-power circuits at cryogenic temperatures for quantum computing applications

FIG: Room temperature back-gate coefficient η versus VT−VB for an n-type conventional well (RVT) FDSOI FET with 1 µm of gate length and width. The θ=0 happens at VT−VB = −0.63V due to −0.63V of the front-back gate work function difference 

Acknowledgment: The authors would like to thank Claudia Kretzschmar from GlobalFoundries Germany and GlobalFoundries University Partnership Program for providing 22 FDX® test structures and support. Hung-Chi Han would like to thank Davide Braga from Fermi National Accelerator Laboratory for his valuable support. This project has received funding from the European Union’s Horizon 2020 Research & Innovation Program under grant agreement No. 871764. SEQUENCE.

[paper] Above Vth Model for SC DG MOSFETs

David Chuyang Hong; Yuan Taur

An Above Threshold Model for Short-Channel DG MOSFETs

in IEEE TED, vol. 68, no. 8, pp. 3734-3739, Aug. 2021

DOI: 10.1109/TED.2021.3092310.

*Department of Electrical and Computer Engineering, University of California at San Diego, La Jolla, CA 92093 USA

Abstract: An above-threshold I–V model is developed for short-channel double-gate (DG) MOSFETs. It is a non-gradual channel approximation (non-GCA) model that takes into account the contribution to carrier density from the encroachment of source–drain bands into the channel. At low-drain bias voltages, the effect appears as a gate-voltage-dependent reduction of channel resistance, with stronger effects at low gate overdrives. At high-drain biases, the intersection of source band encroachment with the gate-controlled channel potential leads to a point of virtual cathode a small distance from the source. By incorporating the depletion of carriers in the source and drain regions into the boundary conditions, the Ids-Vds and Ids-Vgs characteristics generated by the model are shown to be consistent with TCAD simulations.

Figure below shows the schematic of a DG MOSFET (undoped). The device operation is governed by 2-D Poisson’s equation

Fig: Schematic of a DG MOSFET. The parameters assumed are tsi=4nm, ti=2nm, εsi=εi=11.8ε0, with channel length L ranging from 15 to 7nm. The gate work function is 0.28eV below that of intrinsic silicon so Vt=0.247V.