OFETs Compact Modeling

Advances in Compact Modeling of Organic Field-Effect Transistors

Sungyeop Jung¹, Member, IEEE, Yvan Bonnassieux², Gilles Horowitz², Sungjune Jung¹, Member, IEEE, Benjamin Iñiguez³, Fellow, IEEE, and Chang-Hyun Kim⁴, Senior Member, IEEE

IEEE J-EDS (Early Access)

DOI: 10.1109/JEDS.2020.3020312

¹Future IT Innovation Laboratory and Department of Creative IT Engineering, Pohang University of Science and Technology, Pohang 37673, South Korea.
²LPICM, Ecole Polytechinque, CNRS, 91128 Palaiseau, France.

³DEEEA, Universitat Rovira i Virgili, Tarragona 43007, Spain.

⁴Department of Electronic Engineering, Gachon University, Seongnam 13120, South Korea

Abstract: In this review, recent advances in compact modeling of organic field-effect transistors (OFETs) are presented. Despite the inherent strength for printed flexible electronics and the extremely aggressive research conducted over more than three decades, the OFET technology still seems to remain at a relatively low technological readiness level. Among various possible reasons for that, the lack of a standard compact model, which effectively bridges the device- and system-level development, is clearly one of the most critical issues. This paper broadly discusses the essential requirements, up-to-date progresses, and imminent challenges for the OFET compact device modeling toward a universal, physically valid, and applicable description of this fast-developing technology.

Figure (a) Cross-sectional illustration and (b) circuit diagram with multi-component overlap capacitances of the printed 3-D organic complementary inverter, and (c) measured and simulated transient output voltage of an 11-stage ring oscillator.