[PhD] Compact DC Modeling of Tunnel-FETs

Compact DC Modeling of Tunnel-FETs

November 2019

PhD Thesis of Fabian Horst 

Doctor Advisor: Profs. Benjamin Iniguez and Alexander Kloes

Abstract - In the last decade, the tunnel field-effect transistor (TFET) has gained a lot of interest and is handled as a possible successor of the conventional MOSFET technology. The current transport of a TFET is based on the band-to-band (B2B) tunneling mechanism and therefore, the subthreshold slope at room temperature can overcome the limit of 60 mV/dec. In order to describe and analyze the TFET behavior in circuit simulations, this dissertation introduces a compact DC model for double-gate TFETs. The modeling approach considers the B2B tunneling and the parasitic effect of trap-assisted tunneling (TAT) in the ON- and AMBIPOLAR-state of the TFET. It includes a 2D compact potential equation package to de-scribe the band diagram of the TFET. Based on the band diagram, the B2B tunneling and TAT current part are derived separately. In order to do so, firstly a compact expression for the tunneling length is found, which is then used together with a numerical robust Wentzel-Kramers-Brillouin (WKB) approach to calculate the tunneling probability. Afterwards, using Landauer’s tunneling equation, the tunneling generation rate is calculated and approximated to come to a closed-form expression for the current density. Further approximation of the current density by a mathematical function, compact expressions for the resulting B2B tun-neling and TAT current are achieved. The verification of the model is done with the help of TCAD Sentaurus simulation data for various simulation setups. Furthermore, the validity of the model is proven by measurements of fabricated complementary TFETs. In order to demonstrate the numerical stability and continuity as well as the flexibility, simulations of TFET-based logic circuits like a single-stage inverter or an SRAM cell are performed and analyzed. The combination of the DC model with an TFET AC model allows for a transient simulation of an 11-stage ring oscillator. 

Fig: 2D sketch of the n-type DG TFET device geometry, showing the channel thickness t ch , the channel length l ch , the gate oxide thickness tox and the length of the S/D region l sd . Source (S) and drain (D) region are highly p/n-doped with a doping concentration N s/d 

URL: http://hdl.handle.net/10803/668957